Never underestimate the power of a tape measure. I always carry a small tape measure in my purse. Why, you may ask? That little guy has been used more times than I can count. It’s measured furniture pieces, frames, inseams of pants, and even height when filling out a health form. A few years ago that trusty tape measure secured a nice buffet and a credenza from the consignment center.
After searching a few months for some quality storage pieces for the new house, I hit the jack pot. In the back of the consignment store were two sturdy pieces with nice lines and completely made of real wood. I spotted them moments before another man noticed them. While looking at the pieces, he came up behind me and said how he was also interested so I better watch out. As I looked him in the eyes, I gave a little smirky smile and could hear The Good The Bad and The Ugly song in my head. Duh na na na na, wuh wuh wuh. (Thanks Dad for broadening my movie list.)
Too bad he was slow on the draw by not having a tape measure on hand. He walked off to go find one as I pulled mine from my purse. I was able to measure the piece and have the sales lady tag it for me before he returned with a borrowed tape measure. I’d like to say that I felt bad for him, but I didn’t. You snooze, you lose. Or maybe a kinder way of stating that would be to go with the Boy Scout motto: Be Prepared. I may be loosely interpreting the motto.
BUFFET PIECE
Let me just age myself about 40 years and say, “they don’t make ’em like they used to.” New furniture is EXPENSIVE! Rarely is a new wood piece made without any cheap wood and particle board. This is why I adore buying old, loved pieces from back in the day when furniture was substantial. Before we moved to Texas I built up my cache of money to spend on furniture for our new house.
When I returned triumphant from the consignment center, I cleaned the large furniture pieces up with some orange oil. The credenza fit beautifully in the kitchen and had a great existing finish. Damage to the finish on the top of the buffet was noted once it was cleaned. I wasn’t too worried about it since the stain was a cherry color and didn’t really go with our house.
Plans to refinish the buffet were in the works. Stripping the furniture and re-staining the entire piece was a possibility. I thought, “If I’m going to spend the time refinishing it, I might as well try to combine finishes.” The top was stained to better match the woven wood wall, and then blue furniture paint was used on the interior. Chalk paint was applied to the outside buffet base, doors and drawers. The bright white of the chalk paint was mellowed with toner. I sealed the stained top with varnish and sealed the chalk paint with wax.
This project took a few days. For sustenance, here is a recipe for Instant Pot Barbacoa Beef Tacos.
Supply List
For Stripping Furniture
- 110 and 220 Grit Sand Paper
- Palm Sander
- Heat Gun
- Putty Knife
- Respirator
- Ear Plugs
- Eye Protection
- Extension Cord
- Rag to dust
- Vacuum
- Tack Cloth
For Staining and Finishing Buffet Top
- Desired Stain (I used Minwax Jacobean)
- Cotton rags to apply stain and some to wipe off stain
- Gloves
- Paint Key
- Stir Stick
- Varnish- Minwax Polycrylic Semi-Gloss
- 1.5 inch paint brush (this width fits in the small varnish can)
- Tarp or Drop Cloth
For Painting the Interior of the Buffet
- Deco Art Americana Decor Satin Enamel in Dark Denim
- 1.5 -2 inch paint brush
- Tack Cloth
- Cans of the same size to prop up shelves while painting
For Painting the Buffet Exterior
- Valspar Chalky Finish Paint “Her Dainties”
- Spray bottle with water
- Country Living Caromal Colours Toner
- Valspar Sealing Wax
- Clean Cotton Cloth(s)
- 2 inch Paint brush
- Masking tape
- Blocks of Scrap Wood
- Metallic Spray paint for hinges, pulls and screws
- Piece of Cardboard
Instructions:
Step 1:
Move the furniture piece to an area with good ventilation. Due to bad weather, I kept my buffet in the garage as opposed to outside. This worked great for taking a few days to do all the stripping and sanding of the wood furniture.
Step 2:
Remove the drawers, doors, and pulls from the furniture and put all hinges, pulls and screws in a baggie so they don’t get lost.
Step 3:
While wearing protective gear and with good ventilation, use the heat gun per instruction booklet to heat the varnish and then scrape it off with the putty knife. Do not gouge the wood.
There are chemicals that can be painted on the varnish that will soften it and then you can scrape it off. I prefer to not mess with strong chemicals if at all possible. Sanding the entire piece is another option. Lacking copious amounts of sandpaper, but owning a heat gun, I went with the method that was easiest for me.
Step 4.
Once all of the varnish is scraped off from the base, cabinet doors, shelves, and drawer fronts, sand with 100 grit sandpaper and a palm sander. Once complete, sand again but with 220 grit sandpaper to leave a smoother finish. Take note that the inside of the cabinet is not sanded completely down to the bare wood. I just took the sheen off the varnish since it was being painted with furniture paint. Deco Art Americana Decor Satin Enamel has a primer in it and claimed to adhere without the need for sanding. I put it to the test. The buffet top that was to be re-stained took more attention to expose the bare wood.
Step 5:
Vacuum off all of the pieces before moving them back into the house. Clean up the sawdust in the work space.
Lay down a tarp or drop cloth. Next, place the buffet base on wood blocks on the tarp and move all other furniture pieces inside.
Step 6:
Wipe off buffet with tack cloth to eliminate any dust particles.
Put on gloves, stir the stain and apply stain in the direction of the wood grain with a clean cotton cloth. With a different clean cotton cloth, wipe off additional stain. Two coats of stain can be applied to get a deeper saturation of color. Or make a custom color by applying two different colored stains.
TIP: Test the stain color on the underside of a drawer to verify that is the color that you are happy with. An inconspicuous test area eliminates any need for additional sanding.
Step 7:
Once the stain has dried, use a paintbrush to apply varnish. Again, apply with the grain. Do multiple thin coats for better coverage. Let each coat completely dry before applying the next coat. Application and clean up directions are on the can.
Step 8:
While the varnish dries, paint the interior of the buffet with the blue furniture paint. I started with the back panel, then did the inside top, followed with the sides and base panel. Paint all of the more difficult sections first to eliminate bumping wet paint. Wash out brush.
TIP: Place the shelves on canned goods of equal height so that you can paint the sides and top of the shelves without getting paint all over the tarp or drips drying on the underside of the shelf. When dry, flip over the shelf and paint the reverse side.
Step 9:
Apply two even coats of chalk paint to the buffet base, allow each coat to thoroughly dry. Pay particular attention to the face frame. Attempt to keep the blue and white from creeping over the edges onto the other color. It just takes a steady hand…and perhaps a trusty sidekick. Ahhh, Percy.
Step 10:
Paint the doors and drawers with two coats of chalk paint. First, I paint the backside of the doors. Next, once they are dry, I paint the front of the doors. Paint in the grooves or details first, then the center panel and then the outer frame (rails and stiles) of the doors. Finally, paint the faces of the drawers. Let dry completely, perhaps even over night. Wash out brush.
TIP: Use masking tape around the drawer box to maintain a clean edge when painting the drawer face.
Step 11:
Toner applied over the white chalk paint will leave a mild, slightly darker glazed finish. The toner brings out any woodwork details and can give the furniture a more aged appearance. The intensity of the toner is determined by how much is applied and removed. I wanted most of the toner to be removed. Once the toner is applied to an area, quickly mist it with water from a spray bottle to maintain a workable surface. Wipe the toner off with a clean cotton rag with no loops. Continue the process for all chalk painted surfaces.
DO NOT stop mid application. Complete all of one panel before stopping to do something. If the wet edge dries, it will not be easy to blend another wet edge into it.
Let dry completely. Wash brush and dry.
Step 12:
Once the toner is completely dry, apply the sealing wax and wipe off excess. This will seal the paint and give it a more durable finish. Chalk paint can also be finished with a varnish. I just like the subtle sheen of the wax. Not to mention, I already had all of these paints and varnish from other projects so it is nice to use what is in the cupboard. Again, wash the brush and let dry.
Step 13:
Before reattaching doors or pulls, spray paint the finish on all metal pieces. Use a metallic spray paint to paint the hinges, pulls, and screws so they all coordinate. I went with Rustoleum Flat Soft Iron which is a metallic spray paint and primer in one. The original brassy finish wasn’t doing it for me, so I chose a metallic that still gave an aged feel but with an updated vibe.
TIP: Push the pointed ends of the screws into a piece of cardboard so the screw heads are facing up and free standing. With a few easy swipes of the spray paint, you get complete coverage.
Step 14:
Remove the tarps and wood blocks, reassemble the buffet and sit back to enjoy your project.
To keep with the western theme: I’m off to go ride my horse into the sunset with my trusty tape measure at my side. The Good is the way this buffet turned out and the tips you’ll get from this post. The Bad is that you have to find your own piece. The Ugly is the blister I received from the hot varnish. (No worries, the scouts were able to treat it for first aid practice that night. Silver lining!)
There is nothing quite like the feeling of making an old piece new. I am in love with the pop of color when the cabinet door is opened. The paints were some that I had from previous projects so the cost of this refurnished piece was minimal. It mostly just took time and elbow grease. This old Drexel Heritage buffet is getting a new lease on life and I’m making a house a home. 💙
More Makeover Posts
8 Ways to Polish Brass but 1 Winner (video)
How To Replace a Bathroom Faucet
Updating Furniture Hardware and Filling in Old Holes
Stenciled Dining Table Makeover
Find the Light You LOVE for Less
Peel and Stick Backsplash: Does it Work? (videos)
Kitchen Island Makeover for $20
Farmhouse Kitchen Table Makeover
Inexpensive Teen Boy Bathroom Update
How To Re-Cover Dining Chairs (video)
Revamp the Lamp! Spray Paint to Update a Lamp Base
Front Porch Rattan Chair Makeover
Picking Out the Right Tile Flooring for Our Home
Demo and Installation of Wood Look Ceramic Tile
Jute Covered Plastic Potted Plant